Brand New "KFI" Winch Mount for the Following Polaris ATV's:

Supersedes Winch Mount #101740 and 100740

NOTE X:Bumper Conversion Bracket #101895 will need to be purchased in order to reinstall OEM Polaris Front Bumper (See Below)

Even if the machien does not come factory with the front bumper but you plan on adding the bumper to your current year Polaris Sportsman, the conversion bracket will be required (See Below)


Mount designed to work with the following winches:

KFI: ST17 / A2000 / A2500-R2 / A3000 / SE25 / SE35
KFI: AS-50 (requires purchase of ATV-MR)
WARN:VRX 25 / VRX 25-S / VRX 35 / VRX 35-S
WARN:A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
WARN:RT15 / RT25 / RT30 / XT15 / XT25 / XT30
WARN:Vantage 2000-3000lbs / Provantage 2500-3500lbs
RAMSEY : ATV2500 / ATV3000
SUPERWINCH : LT2000 / LT2500 / LT3000 / LT4000ATV (Will NOT work with Terra 25/35/45)
MILE MARKER :PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500
MASTER LOCK :1500lbs #2955AT
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
CYCLE COUNTRY :Work Power 1500 and 2500
BADLAND: 2-Hole Winches (Click Here for Details)
BADLAND: Standard Winches (Click Here for Details)
VENOM: 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)
All with 3.00" x 4.875" bolt pattern mount-up.
CHAMPION : 2-Hole Winches (Click Here for Details)
CHAMPION : ATV 4-hole Winches (Click Here for Details)
KEEPER CORP. TRAKKER :KT2500 / KT3000 / KT2500C / KT3000C
KEEPER CORP. TRAKKER :KT2000
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
SMITTYBILT :XRC 2.0
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
Listed models come with incorrect ATV roller fairleads.
SMITTYBILT :XRC 3.0 / XRC 4.0
XGEAR: X3000 / X4000
4-Hole Standard (3.00" x 4.875" bolt pattern.
Traveller:1078088 / 1078302
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF
Possibly many others with the below standard mounting patterns, call to confirm.
4-Hole Standard (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
2-Hole (3.10" with rollers that are 4.875" bolt pattern)
QUADBOSS: RP25 / RP35

Specifications:

100% MADE IN USA.
Constructed of 10 GA GR50 steel
Designed to fit between in the OEM location below the radiator
Unlike all other mount competitors, our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
Powder coated black for supreme durability.
Mounts the same as OEM intended.
Works with all Polaris OEM Brush Guards and Double Tube Bumpers.
Very easy to install.
Complete installation instructions included.
All mounting hardware included.
Will work with Polaris Glacier Plow.
Satisfaction guaranteed.
Roller fairlead and winch not included.



Why buy the OEM Kit when you can SAVE $100-$150 by getting your winch separate and buying our High Quality 100% American made winch mount. Your Sportsman is pre-wired with the battery wires pre-ran from your battery to the contactor mount located under your front RH wheel well. We have everything you need in our kit to mount your winch and fairlead.